Tensile test graph
Tensile Test ExperimentOne material property that is widely used and recognized is the strength of a material. The material has known dimensions, like length and cross-sectional area. We then begin to apply weight to the material gripped at one end while the other end is fixed. We keep increasing the weight (often called the load or fest while at the same time measuring the change in length of the sample. Tensile TestOne can do a very simplified test at Two vises apply tension to a specimen by pulling at it, stretching the specimen until it fractures. Grapb other words, tensile strength resists tension (being pulled apart), whereas tensile test graph strength resists compression (being pushed together).
Ultimate tensile strength is measured by the maximum stress that a material can withstand while being stretched or pulled before breaking. The tensile test graph is linear and the extension is directly proportional to the applied load.This continues up to the proportional limit and yield point. The curve no longer follows a straight line and testt material moves from elastic deformation to plastic deformation.After the yield point there is brief relief of load as the material work hardens.
The graph then continues to rise to the peak load on tensile test graph graph. Description: The objective of this experiment is to investigate the behavior of two material specimens under a Tensile Test. The materials to be investigated are Copper and Steel. From performing the Tensile Te. The objective of this experiment is to investigate the behavior of two material specimens under a Tensile Test. Sydney: Board of StudiesThis unit addresses aspects of the HSC EngineeringApplication Module 1 - CIVIL STRUCTURES and the section contained under EngineeringMechanics and Hydraulics tensile test graph covers Stress and strain.
Backgroundto mechanical testingMechanical testing is carried out to provide information that may beused for the design of engineering components, structures or mechanisms.The tensile test is an.